Product Details - Preparatory and Specialty Products Range


Acrylic Anti-Stain Sealer for Fire/Smoke Damage, Tar, Fat & Oil Stains

Duralex BLEED SEAL is an efficient sealer for a wide variety of common stains which would typically bleed through conventional paint systems. It is not intended for tannin, nicotine or water stained surfaces. It is specially formulated to possess high resistance to bleed prone stains such as smoke, tar, creosote, fat, etc on interior and exterior surfaces.

USES (Interior & Exterior)

It may also be used as an adhesion primer over varnish and as a rapid drying undercoat for new gyprock, primed timber and non-metallic surfaces inside.


Available in White only. Addition of stainers may reduce anti-bleed properties.

For more detailed instructions ask for a product information sheet.

Sizes 1 Litre, 4 Litre and 10 Litre.
Coverage A maximum coverage rate of 14m² per Litre. This may fall below 10m² per Litre when painting corrugated, rough or absorbent surfaces.
Ventilation Allow adequate cross ventilation when painting indoors during and after use to dissipate water vapour.
Clean Up Wash all equipment with clean water. Any dried spots may be removed using methylated spirits.
IMPORTANT Keep out of reach of children. To avoid spoilage of paint, keep container sealed when not in use.
Environment Low odour. Low V.O.C. Environmentally friendly.