Ultra Premium

Print Version

Sun Master Gloss

Additional Information

COLOURS
Available in White and Tint Bases which are compatible with all major tinting systems. Tinter, if added, should be shaken or stirred in thoroughly immediately after addition. Ready mixed colours include: – Black, Brunswick Green, Indian Red, Mission Brown.

USES
Weatherboard, pergolas, picket fences, rails, plasterboard, particleboard, MDF, galvanised iron and other rust resisting metals, fibro and masonry. It is not recommended for contact surfaces such as windows, doors or trim, furniture, shelves or wrought iron. These are best painted with turps-thinned enamel.

SURFACE PREPARATION
The surfaces to be painted must be sound, clean, dry, rust resisting and free from dust, chalky paint, dirt, mould and grease. Rub off loose sand from cement render with a block of timber and sweep clean.

Previously Painted Surfaces
Before recoating previously painted surfaces, ensure that the surface is sound. Test at random for its ability to withstand extra coats. Simply cut a small cross (x) through the paint with a razor blade, then place a piece of sticky tape firmly over the cut. If the tape pulls the surface away, the surface is unsound. Test different areas before deciding whether or not the surface coating should be removed. Unsound surfaces should be stripped before repainting to achieve the best results. Fill cracks and holes with an appropriate filler.

Timber
Prepare as above. Sand weathered timber back to clean sound wood and dust down. Fill imperfections with a suitable filler, sand smooth and dust down. When brushing new timber, apply in the direction of the grain, paying attention to end grain so that it receives a liberal coating.

Cement Render, Brick, Fibro, Plasterboard, Plastic Guttering & Downpipes, MDF, Particle Board, etc.
New unpainted – Prepare as mentioned.
Apply Duralex SUN MASTER GLOSS direct to surface.

New Galvanised Iron
Remove surface oil using turps, nylon scourer and wipe clean with rag. Wash with detergent and water before painting. Apply Duralex SUN MASTER GLOSS direct to surface.
Note: Duralex SUN MASTER GLOSS is not recommended on roofs used for the collection of drinking water.

APPLICATION
APPLY 2 COATS ON PREVIOUSLY PAINTED SURFACES AND 3 ON UNPAINTED SURFACES, FOR MAXIMUM DURABILITY.
Stir thoroughly using a lifting motion. To ensure best performance, do not use any additive not approved by Duralex. Brushing is recommended over previously unpainted timber. Pre-moisten brushes and rollers with water, shaking off excess. Do not allow paint to dry on brush or roller for a smoother, nib-free job. Up to 100mL water per Litre may be added if difficulties in application are experienced outside in hot weather.

WEATHER
Surface temperature must be above 10°C and not over 35°C during application. Allow at least 2 hours drying before dew, fog or rain. Follow shade around the house in hot weather.

COVERAGE
Up to 14 square metres per Litre per coat.

CLEAN UP
Wash all equipment with clean water. Any dried spots may be removed using methylated spirits.

CAUTION
Allow adequate ventilation when painting indoors during and after use to dissipate water vapour.

SIZES
15, 10, 4, 2, 1 Litre, 500mL and 250mL sample pots. (White also available in 20 Litres).

ENVIRONMENT
Low odour. Low V.O.C. Environmentally friendly.

IMPORTANT
Keep out of reach of children. To avoid spoilage of paint, keep container sealed when not in use.

---

	Everclean A technically superior stain resisting Low Sheen 100% acrylic, no primer required, house paint which is more resistant to normal household stains such as red wine, coffee, beetroot, etc. A truly "kid proof" product. University endorsed as superior to all other brands on the market. Also for external decoration for those requiring a high degree of stain and mould resistance on exterior walls - 10 year guarantee. The guarantee is as shown on the label and not unconditional.
	Sun Master Low Sheen A sun resistant, 100% acrylic, no primer required, interior exterior house paint for weatherboard, timber, masonry walls, decking, M.D.F., galvanised iron, etc. Available in full gloss and low sheen. Both are as good as the best on the market. 10 year guarantee. The guarantee is as shown on the label and not unconditional.
	Trim Master Acrylic Gloss Enamel A hard-wearing, non-yellowing water-based enamel for interior and exterior use on skirting boards, windows and trims. DuralexTRIM MASTER® ACRYLIC GLOSS ENAMEL is designed with superior cross-linking 100% Acrylic technology resulting in a harder, tougher surface coating. The guarantee is as shown on the label and not unconditional. Also available in Acrylic Satin Enamel
	Trim Master Acrylic Satin Enamel A hard-wearing, non-yellowing water-based enamel for interior and exterior use on skirting boards, windows and trims. DuralexTRIM MASTER® ACRYLIC SATIN ENAMEL is designed with superior cross-linking 100% Acrylic technology resulting in a harder, tougher surface coating. The guarantee is as shown on the label and not unconditional. Also available in Acrylic Gloss Enamel
	Sun Master Semi Gloss A sun resistant, 100% acrylic, no primer required, interior exterior house paint for weatherboard, timber, masonry walls, M.D.F., galvanised iron, etc. Available in full gloss and low sheen. Both are as good as the best on the market. 10 year guarantee. The guarantee is as shown on the label and not unconditional. Exposure tests show SunMaster Gloss to last about 4 times longer than alkyd (oil) paints.